Skip to main content

Connection Guide for MacOSX Devices

This guide will help you get your Mac OSX Device online and running on the VK44 Network.

Requirements

The below files and resources are required in order to connect your Mac OSX Device to the VK44 Network.

OpenVPN Client

You will need to download the OpenVPN Client for MacOSX to install it onto your device.

OpenVPN Client can be downloaded from here:
https://openvpn.net/downloads/openvpn-connect-v3-macos.dmg 

VK44.NET Profile

You will need to apply for a VK44.NET VPN Profile from our dashboard and ensure your have it ready to place onto the Node OpenVPN Client.

This service is available free of charge to VK (Australia) Amateur Radio Operators which are approved users of the VK44 Network. Service Terms and Conditions apply.

Instructions

1. Locate and Install the OpenVPN Client you downloaded from the above site.

2. Download your VK44.NET Profile (from the VK44.NET Dashboard).
It should be in a folder with the Node Callsign and under "Windows and Mac Configuration Profile".
The correct file will end in ".ovpn".

Screen Shot 2021-12-12 at 6.48.33 pm.png

3. Open the OpenVPN Connect Client on your device.
Can be found in the Application Folder.

image-1639295535877.52.09 pm.png

4. Click on the plus icon to add your VPN Profile.

Screen Shot 2021-12-12 at 6.51.03 pm.png

5. Click on the File Tab.

Screen Shot 2021-12-12 at 6.52.47 pm.png

6. Click on the Browse button and locate the VK44.NET VPN Profile you downloaded from the Dashboard earlier (steps above).

Screen Shot 2021-12-12 at 6.52.54 pm.png

7. You will then see the VK44.NET in your list of networks you can connect to.
Click the connect slider bar in order to connect to the network.

Screen Shot 2021-12-12 at 6.54.28 pm.png

8. You will now see that you are connected to the network and can use Network Resources.
If you scroll down, you will be able to see that you are now using your assigned VK44.NET IP Address.

Screen Shot 2021-12-12 at 6.56.43 pm.png

Screen Shot 2021-12-12 at 7.04.08 pm.png

FUN CHECK - Google "What is my IP?" and Google will tell you what IP Address you used to connect to the Internet. :)

If you are wanting to use EchoLink on your Mac Device, hot tip, open EchoLink AFTER you connect to the network.
This ensures that the EchoLink System knows what your VK44 IP Address is and can allow outbound and inbound connections.

Check to make sure that the repeater is showing up on the VK44.NET VPN Dashboard - https://vpn.vk44.net 
If all is correct, you are now able to access your repeater at it's Dahsboard URL: https://CALLSIGN.vk44.net

For additional assistance, please reach out to us in the Support: VK44.NET Support Chat on the Dashboard.

 

 

Back to top