Connection Guide for Linux Device (Cent OS)

This guide will help you get your Linux Device (running Debian/Ubuntu/Raspbian) online and running on the VK44 Network.

Requirements

The below files and resources are required in order to connect your Linux Device which is running Debian,Cent UbuntuOS (or Raspbianlike (RPi)distribution) to the VK44 Network. 

VK44.NET Profile

You will need to apply for a VK44.NET VPN Profile from our dashboard and ensure your have it ready to place onto the Node OpenVPN Client.

This service is available free of charge to VK (Australia) Amateur Radio Operators which are approved users of the VK44 Network. Service Terms and Conditions apply.

Instructions

1. Connect to the Linux device via SSH.

sudo su
apt-getyum update && apt-getyum upgrade -y
apt-getyum install openvpn -y
nano /etc/openvpn/client.conf

3. PASTE the contents of the VK44.NET VPN Configuration from the CALLSIGN.conf file that you downloaded from the VK44.NET Dashboard.

1. Ctrl + X to close
2. Y to save

4. Register the OpenVPN Client Service and Start the Service.

systemctl enable openvpn@client
systemctl start openvpn@client

Check to make sure that the repeaternode is showing up on the VK44.NET VPN Dashboard - https://vpn.vk44.net 
If all is correct, and you are hosting a web service, you are now able to access yourthe repeaterweb interface at it's DahsboardDashboard URL: https://CALLSIGN.vk44.net

For additional assistance, please reach out to us in the Support: VK44.NET Support Chat on the Dashboard.